Filter
Top Products
5. Wall Positioning Page
For vertical string directions
When the height matches exactly the number of blocks to be placed, the width does not matter:
e.g. height = 64 with no gap : each column will be filled up with one string.
e.g. height = 32 with no gap : the first string will be divided over the first 2 columns. The second string
will start on the third colomn, etc.
e.g. height = 95 with gap = 1 : each column will be filled up with one string. Between each column there
is gap of one pixel.
e.g. height = 126 or 127 or 128 with gap = 2 : each column will be filled up with one string. Between each
column there is gap of two pixels.
5.4.3.7 Manual fill
When Outline in Grid is not selected, manual fill is automatically active.
How to set up
1. Uncheck Outline in Grid (image 5-37)
Or,
check OutlineinGridand uncheck Auto fill. (image 5-38)
Now it is possible to manually place blocks on the work space.
To see how to place blocks, see "Add blocks to a design", page 59.
Image 5-37
No viewport selected
Image 5-38
No auto fill
5.4.3.8 Outline border On or Off
This function is only active when an outline is defined during the design configuration.
How to switch ?
1. Right click in the workspace.
A popup window appears. (image 5-39)
2. Select View and move your mouse to the right.
3. Select Show outline.
R5976380 XLITE TOOLSET 16/03/2005
57