Filter
Top Products
21. MiPix Display Configuration
21.2 Screen settings
Overview
•Overview
• Tile Settings
21.2.1 Overview
Type
The type of the LED wall is indicated, MiPix.
Measurement System
Type of measurement during manufacturing
Contrast
The light output of the screen in Nit value dependent on the wall type.
To change the contrast:
• Move the slide bar with the mouse. The value in the box next to the slide bar will be adapted. or
Click in the digit window next to the slide bar and change the value by direct entering via the keyboard.
- MiPix Display : 0 to 1300 Nit
Flicker Adjustment
Master clock set up depending on the frame rate.
When clicking on 50Hz or 60Hz, the default value will be filled in. This default value depends on the wall
type.
Display Type
MiPix20
50Hz
Ma-clock
150
PWM
10
60Hz
Ma-clock
305
PWM
8
Another value can be entered by clicking in the digit area and entering the desired value with the keyboard.
Mode
Mode can be Internal or External.
Internal internal test pattern will be displayed.
Thecolorcanbeselected(R–G–B).
External
images from a digitizer will be d
isplayed.
Color selection is grayed out.
String
colors
An internal pattern with fixed colors per string will be generated to check the string
connections.
String 1 = red, string 2 = green, string 3 = blue and string 4 = yellow.
String
directions
A running light pattern is acti
vated so that the directions of the strings can be checked.
Resolution mode
For MiPix displays, the ’Resolution mode’ can only be Real.
260
R5976380 XLITE TOOLSET 16/03/2005