Filter
Top Products
19. SLite Display Configuration
Displaying the tile properties
1. Click on one of the rectangular orange area, to open the Tile properties page.
This page mainly consist of read-only properties, except for the Mode (internal/external), which can be
switched.
All indicated values are tile specific. (image 19-5)
Image 19-5
Tile settings window
Available Tile Settings
PWM Repeat
PWM peak
Mode : this can be switched between internal and external.
internal
internal test pattern will be displayed on that specific
tile.
external
external source for digitizer will be displayed on that specific tile.
Tile Cutout
Analogue Contrast
Digital Contrast
Measurement System: calibration system per tile, normal calibration or multi-calibration.
Chroma Measurements: Chroma measurement overview per tile.
Device Properties
Address The tiles address, each tile is addressed individually
Serial numbe
r
The tiles ser
ial number, each tile has its own Serial Number.
Runtime The tiles tim
einuse.
PCB Identification The version of controller printed circuit board used.
248
R5976380 XLITE TOOLSET 16/03/2005