Filter
Top Products
16. DLite Display Configuration
16.2 Screen Settings
16.2.1 Overview
Type
The type of the LED wall is indicated : DLite.
Measurement System
Indicates type of measurement system during manufacturing.
Contrast
The light output of the screen in Nit value dependent on the wall type.
To change the contrast:
• Move the slide bar with the mouse. The value in the next to the slide bar will be adapted. or
Click in the digit window next to the slide bar and change the value by direct entering via the keyboard.
- DLiteDisplay:0to5000Nit
Flicker Adjustment
Master clock set up depending on the frame rate.
When clicking on 50Hz or 60Hz, the default value will be filled in. This default value depends on the wall
type.
Display Type 50Hz 60Hz
DLite7 13 3
DLite10 18
5
DLite14 13 3
DLite28 13 3
Another value can be entered by clicking in the digit area and entering the desired value with the keyboard.
Mode
Mode can be Internal or External.
Internal internal test pattern will be displayed.
Thecolorcanbeselected(R–G–B).
External
images from a digitizer will be displayed.
Color selection is grayed out.
Resolution mode
For DLite displays, the ’Resolution mode’ can be set on Real or Virtual.
Real
one pixels contains 5 LEDs (2 red, 2 green and 1 blue).
Virtual
one pixels contains 3 LEDs (1 red, 1 green and a common blue)
Gamma
Click on to load the Gamma adjustment environment window.
216
R5976380 XLITE TOOLSET 16/03/2005