Filter
Top Products
23. Maintenance Page
Image 23-21
Color calibration window for a stacked configuration
23.3.2 Color Calibration for ILite and OLite
Application
•ILite3
• ILite8, ILite10 and ILite12 (embedded soft > 2.05)
•ILiteXP
•ILiteMD
• OLite 510
23.3.2.1 Start up
Startupofthecolorcalibration
1. Click on Color Calibration. (image 23-22)
The color calibration page appears. (image 23-23)
2. Select the calibration range.
From / to address Fill out the from till address in the box below. Only this range will
be calibrated.
All tiles in selected screen All tiles in the selected screen will be calibrated.
All tiles in selected display All tiles in the selected display will be calibrated.
All similar tiles All similar tiles in the stack will be calibrated.
To exclude some tiles, click on a tile or make a multiple selection by pressing the Ctrl key. The back-
ground becomes red. Check the box Exclude from calibration.
3. Click on Next.
280
R5976380 XLITE TOOLSET 16/03/2005