Filter
Top Products
23. Maintenance Page
Image 23-28
White point adjustment via curve
Custom color temperature set up
1. Verify that the check box in front of Use colortemp. traject in not checked off (1) (image 23-29)
2. Click on the end point white to select.
3. Hold down the left mouse button and drag the white point to the desired coordinates (2).
Note: The white point cannot move out of the predefined rectangular.
Or,
Click on the + or - buttons of the x and y coordinate of white until the desired value is reached (3).
Or,
Click in the input field and enter the desired valu
ewiththekeyboard(3).
R5976380 XLITE TOOLSET 16/03/2005
285