Filter
Top Products
5. Wall Positioning Page
How to fill out the cutout coordinates
1. Fill out the start position (horizontal and vertical) of the tile by clicking on the input field and entering the
value with the keyboard. (image 5-22)
Or,
click on the - or + button next to Horizontal or Vertical.
2. Calculates the pixels size with the above mentioned formulas.
3. Click in the input fields and enter the appropriate value with the keyboard.
Or,
click on the - or + button next to Size Hor. or Size Vert.
Image 5-22
Cutout coordinates
Screen dimensions
Overview of the wall dimensions are given in pixels.
Apply mode
When Auto apply is checked, the changes will be applied immediately to the wall (online mode).
When the Auto apply is not checked, off line working is possible. Everything can be changed. Click then
on
to send all changes to the wall.
5.3.4 Cutout coordinates for MiPix
What can be filled out
The start coordinates determine the position of e
ach string in the wall. These coordinates have to be
entered for each string.
The size values determine the displayed resolution of the image. These values are filled out when the
working mode is selected.
Pixel gap : the horizontal and vertical distance between two MiPix blocks.
How to fill out the cutout coordinates
1. Fill out the start position (horizontal and vertical) of the string by clicking on the input field and entering
the value with the keyboard. (image 5-23)
Or,
click on the - or + button next to Horizontal or Vertical.
46
R5976380 XLITE TOOLSET 16/03/2005