Filter
Top Products
5. Wall Positioning Page
Image 5-57
Switch strings
5.4.6.8 Rotate selected blocks
Why rotating block ?
From a hardware point of view, during the build up of a MiPix wall, it can become handy that some block or
parts of a string can be rotated to the left or to the right over 90° or 180°. Otherwise, it would be possible
that the cables will be twisted or that an input cable covers an output so that easy cabling is impossible.
How to rotate, first method
1. Select the blocks which must be rotated (multiple selection possible) (1). See "Selecting one block",
page 63 or "Selecting multiple blocks", page 63. (image 5-58)
2. Click on the rotate left (
a) or rotate right ( ) button.
The selected blocks will be rotated over 90° to the left or to the right.
A second rotation for the same blocks is still possible.
Image 5-58
Rotation to the right
How to rotate, alternative method
This method can only be used when your computer is equipped with a mouse with mouse wheel.
1. Select the blocks which must be rotated (multiple selection possible). See "Selecting one block", page
63 or "Selecting multiple blocks", page 63.
2. Press and hold the Shift key, turn your mouse wheel up or down to rotate the block(s) to the left or to
the right.
R5976380 XLITE TOOLSET 16/03/2005
67