Filter
Top Products
15. FiberLink 2 configuration
15.2 FiberLink 2 Selection
How to select
1. Click on the drop down box next to Selection.
2. Select the FiberLink you want to set up.
Note: FiberLinks can be connected in cascade.
15.3 Pattern Generator
Overview
Status transmitter : On/Off
Status receiver : On/Off
Possibilities for the transmitter:
• Multiburst: Type0to7
•Hramp
•Vramp
• Crosshatch : Width of pattern in pixels (pixelwidth 1 to 4)
• Byte level: amplitude of byte level
Possibilities for the receiver:
• Multiburst: Type0to7
•Hramp
•Vramp
• Crosshatch : Width of pattern in pixels (pixelwidth 1 to 4)
• Byte level: amplitude of byte level
Possibilities for Color Transmitter & Receiver:
•Red
•Green
•Blue
•All
Possibilities for Motion Transmitter & Receiver:
• Vertical : up/down
• Horizontal : left/right
15.4 LED Wall Power
Status
“Power off” shuts down the LEDwall and pushing the same button - now with the text “Power ON” - restarts
the LEDwall.
15.5 Device Properties FiberLink
Overview
This box contains a FiberLink Transmit tab and a FiberLink Receive tab.
212
R5976380 XLITE TOOLSET 16/03/2005