NETGEAR STM150EW-100NAS Router User Manual


 
Firewall Protection
135
ProSecure Unified Threat Management (UTM) Appliance
Table 28. Inbound rules overview
Setting Description Inbound Rules
Service
(also referred to as
Service Name)
The service or application to be covered by this rule. If the service or
application does not display in the list, you need to define it using the
Services screen (see Add Customized Services on page 163).
All rules
Action
(also referred to as
Filter)
The action for outgoing connections covered by this rule:
BLOCK always
ALLOW always
Note: Any inbound traffic that is not blocked by rules you create is
allowed by the default rule.
Note: ALLOW rules are useful only if the traffic is already covered
by a BLOCK rule. That is, you wish to allow a subset of traffic that is
currently blocked by another rule. Similarly, BLOCK rules are useful
only if the traffic is already covered by an ALLOW rule. That is, you
wish to block a subset of traffic that is currently allowed by another
rule.
All rules
Select Schedule The time schedule that is used by this rule. By default, there is no
schedule assigned (that is, None is selected from the Schedule
drop-down list), and the rule is in effect permanently. For information
about creating schedules, see Set a Schedule to Block or Allow
Specific Traffic on page 177.
All rules
Send to LAN Server The LAN server address determines which computer on your
network is hosting this service rule. (You can also translate this
address to a port number.) The options are:
Single address. Enter the required address in the Start field to
apply the rule to a single device on your LAN.
Address range. Enter the required addresses in the Start and
End fields to apply the rule to a range of devices.
LAN WAN rules
Send to DMZ Server The DMZ server address determines which computer on your
network is hosting this service rule. (You can also translate this
address to a port number.)
DMZ WAN rules
Translate to Port
Number
If you want to assign the LAN server or DMZ server to a specific port,
you can enable this setting and specify a port number.
LAN WAN rules
DMZ WAN rules
WAN Destination IP
Address
The settings that determine the destination IP address applicable to
incoming traffic. This is the public IP address that maps to the
internal LAN server.
On the multiple WAN port models, it can be either the address of a
WAN interface or another public IP address (when you have a
secondary WAN address configured)
. On the single WAN port
models, it can be either the address of the single WAN interface or
another public IP address (when you have a secondary WAN
address configured).
You can also enter an address range. Enter the required addresses
in the Start and End fields to apply the rule to a range of devices.
LAN WAN rules
DMZ WAN rules