Network and System Management
459
ProSecure Unified Threat Management (UTM) Appliance
Log Storage
After you have integrated a ReadyNAS with the UTM—whether or not you have configured
the quarantine settings—all logs that are normally stored on the UTM are now stored on the
ReadyNAS. That is, all logs that you can specify on the Email and Syslog screen (see
Configure and Activate System, Email, and Syslog Logs on page 467) and that you can
query on the Log Query screen and view onscreen (see Query and Manage the Quarantine
Logs on page 514) are stored on the ReadyNAS. However, after you have integrated a
ReadyNAS with the UTM, logs can no longer be sent to an email address (see the Email
Logs to Administrator section on the Email and Syslog screen). If you have enabled a syslog
server on the Email and Syslog screen, logs are still sent to the syslog server.
WARNING:
When you integrate a ReadyNAS with the UTM, the logs that were
saved on the UTM are deleted.
Note: If the network connection to the ReadyNAS goes down, the
quarantine logs are no longer saved, and all other logs are saved on
the UTM. In this situation, the ReadyNAS and quarantine status
fields show OFF on the System Status screen (see View the System
Status Screen on page 487). When the network connection comes
back up, the quarantine logs and all other logs are saved on the
ReadyNAS once again, but the logs that were saved on the UTM are
deleted.
Connect to a ReadyNAS
To connect to the ReadyNAS on the UTM:
1. Select Administration > ReadyNAS Integration. The ReadyNAS Integration screen
displays: