NETGEAR STM150EW-100NAS Router User Manual


 
Network and System Management
454
ProSecure Unified Threat Management (UTM) Appliance
Reboot without Changing the Firmware
To reboot the UTM without changing the firmware:
1. In the Firmware Reboot section of the Firmware screen (see the previous figure), select
the active firmware version by selecting the Activation radio button for the firmware that
is shown as active in the Type column.
2. Click Reboot. The UTM reboots. During the reboot process, the Firmware screen remains
visible. The reboot process is complete after several minutes when the Test LED on the front
panel goes off and the Firmware screen disappears.
3. Log back in to the UTM.
Update the Scan Signatures and Scan Engine Firmware
To scan and detect viruses, spyware, and other malware threats, the UTM’s scan engine
requires two components:
A pattern file that contains the virus signature files and virus database
Firmware that functions in conjunction with the pattern file
Because new virus threats can appear any hour of the day, it is important to keep both the
pattern file and scan engine firmware current. The UTM can automatically check for updates,
as often as every 15 minutes, to ensure that your network protection is current.
To view the current versions and most recent updates of the pattern file and scan engine
firmware that your UTM is running, select Administration > System Update. The System
Update submenu tabs display, with the Signatures & Engine screen in view: