NETGEAR STM150EW-100NAS Router User Manual


 
Wireless Network Module for the UTM9S and UTM25S
591
ProSecure Unified Threat Management (UTM) Appliance
Encryption
Note: WPA, WPA2, and
WPA+WPA2 only.
The encryption that you can select depends on the type of WPA security that
you have selected:
WPA. You can select the following types of encryption from the
drop-down list:
- TKIP
- TKIP+AES
WPA2. The encryption is AES.
WPA+WPA2. The encryption is TKIP+AES.
Authentication
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, specify the authentication by making
a selection from the drop-down list:
PSK
RADIUS
PSK+RADIUS
WPA Password
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, if you have selected PSK or
PSK+RADIUS authentication, enter a pre-shared key or password. The
password length needs to be between 8 and 63 characters (inclusive).
Schedule To enable the timer, select the Schedule check box. When the timer is
enabled, the wireless profile is turned off from the start time until the stop
time. To disable the timer, clear the check box.
Start Time Specify the start hour in the Hour field and the start minute in
the Minutes field, and then select AM or PM from the
drop-down list.
Stop Time Specify the stop hour in the Hour field and the stop minute in
the Minutes field, and then select AM or PM from the
drop-down list.
VLAN From the drop-down list, select the VLAN to which the wireless profile should
be allocated. The default VLAN is defaultVlan.
VLAN Profiles To configure a VLAN profile, click the VLAN Profiles link. For information
about VLAN profiles, see Configure a VLAN Profile on page 103.
Radius Server Settings
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, if you have selected RADIUS or
PSK+RADIUS authentication, click the Radius Server Settings link to
configure the RADIUS settings (see RADIUS Client and Server Configuration
on page 310).
WEP Index and Keys
Authentication Specify the authentication by making a selection from the drop-down list:
Open System. Select this option to use WEP encryption without
authentication.
Shared Key. Select this option to use WEP authentication and encryption
with a shared key (passphrase).
Table 151. Add Wireless Profiles screen settings (continued)
Field Description