NETGEAR STM150EW-100NAS Router User Manual


 
Monitor System Access and Performance
502
ProSecure Unified Threat Management (UTM) Appliance
The default poll interval is 5 seconds. To change the poll interval period, enter a new value in
the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop
button.
To view the active L2TP tunnel users, select Monitoring > Active Users & VPNs > L2TP
Active Users. The L2TP Active Users screen displays:
Figure 294.
The List of L2TP Active Users table lists each active connection with the information that is
described in the following table.
The default poll interval is 5 seconds. To change the poll interval period, enter a new value in
the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop
button.
View the Port Triggering Status
To view the status of the port-triggering feature:
1. Select Network Security > Port Triggering. The Port Triggering screen displays. (The
following figure shows one rule in the Port Triggering Rules table as an example.)
Table 131. L2TP Active Users screen information
Item Description
Username The name of the L2TP user that you have defined (see Configure User Accounts on
page 401).
Remote IP The client’s IP address on the remote LAC.
L2TP IP The IP address that is assigned by the L2TP server.
Action Click the Disconnect table button to terminate the connection. (This button is displayed
only when there an active connection.)