Introduction
25
ProSecure Unified Threat Management (UTM) Appliance
• Rear Panel UTM50 and UTM150
• Rear Panel UTM9S and UTM25S
• Bottom Panels with Product Labels
The front panels contain ports and LEDs; the rear panels contain ports, connectors, and other
components; and the bottom panels contain product labels.
Front Panel UTM5 and UTM10
Viewed from left to right, the UTM5 and UTM10 front panel contains the following ports:
• One nonfunctioning USB port. This port is included for future management
enhancements. The port is currently not operable on the UTM.
• LAN Ethernet ports. Four switched N-way automatic speed negotiating, Auto MDI/MDIX,
Gigabit Ethernet ports with RJ-45 connectors.
• WAN Ethernet port. One independent N-way automatic speed negotiating, Auto
MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors.
The front panel also contains three groups of status indicator light-emitting diodes (LEDs),
including Power and Test LEDs, LAN LEDs, and WAN LEDs, all of which are explained in
detail in Table 2 on page 30. In addition, the front panel provides some LED explanation to
the left of the LAN ports.
Figure 2. Front panel UTM5 and UTM10
Power LED
Test LED
Left LAN LEDs
Right LAN LEDs
DMZ LED
Left WAN LED
Right WAN LED
USB port