Filter
Top Products
Use the Setup Wizard to Provision the UTM in Your Network
65
ProSecure Unified Threat Management (UTM) Appliance
Register the UTM with NETGEAR
• Use the Web Management Interface to Activate Licenses
• Electronic Licensing
• Automatic Retrieval of Licenses after a Factory Default Reset
Use the Web Management Interface to Activate Licenses
To receive threat management component updates and technical support, you need to
register your UTM with NETGEAR. The UTM comes with four 30-day trial licenses:
• Web protection
• Email protection
• Support and maintenance
• Application control and IPS
The service license keys are provided with the product package (see Service Registration
Card with License Keys on page 23). For electronic licensing, you do not need the service
license keys (see Electronic Licensing on page 67).
IMPORTANT:
Activating the service licenses initiates their terms of use. Activate
the licenses only when you are ready to start using this unit. If your
unit has never been registered before, you can use the 30-day trial
period for all four types of licenses to perform the initial testing and
configuration. To use the trial period, do not click Register in Step
of the following procedure, but click Trial instead.
If your UTM is connected to the Internet, you can activate the service licenses:
1. Select Support > Registration. The Registration screen displays (see Figure 36 on
page 66).
2. Enter the license key in the Registration Key field.
3. Fill out the customer and value-added reseller (VAR) fields.
WARNING:
To activate the 30-day trial period for a license, do not click
Register but click Trial instead. For more information, see the
Important information at the beginning of this section.