Filter
Top Products
Network and System Management
444
ProSecure Unified Threat Management (UTM) Appliance
4. Click Apply to save your settings. The SNMPv3 user profile is added to the SNMPv3
Settings table on the SNMP screen. If the global SNMP settings are enabled, the SNMPv3
user profiles in the SNMPv3 Settings table are also enabled.
Auth Algorithm Type From the drop-down list, select the protocol for
authenticating the SNMPv3 user:
• MD5. Message Digest 5. This is a hash algorithm that
produces a 128-bit digest. This is the default setting.
• SHA1. Secure Hash Algorithm 1. This is a hash
algorithm that produces a 160-bit digest.
Password The authentication password that the SNMPv3 user
needs to enter to be granted access to the SNMP agent
that collects the MIB objects from the UTM.
Private
Algorithm
Type From the drop-down list, select the encryption method for
the communication between the SNMPv3 user and the
SNMP agent that collects the MIB objects from the UTM:
• DES. Data Encryption Standard.
• AES. Advanced Encryption Standard.
Password The privacy password that an SNMPv3 user needs to
enter to allow decryption of the MIB objects that the
SNMP agent collects from the UTM.
Enable Query Select the check box to enable SNMP queries. By default, queries are disabled.
Enable Trap Select the check box to enable SNMP traps. By default, traps are disabled.
SNMP Traps Enter the IP addresses of the SNMP management stations that are allowed to receive the
UTM’s SNMP traps. Separate IP addresses by a comma. If you leave the field blank,
which is the default setting, no SNMP management station can receive the UTM’s SNMP
traps.
Events Select the check boxes for the events for which SNMP traps should be sent:
• WAN connection failure
• Licenses status changed
• Service status changed
• Spam detected
• Malware detected
• Malware outbreak
• IPS detected
• IPS outbreak
• WAN failover detected
• User login failed
• Traffic occurred
• Component updated
• System status changed
• Dos attack detected
• Port scan attack detected
• Firewall event detected
• IPSec VPN detected
• SSL VPN detected
• User login detected
Table 109. SNMPv3 settings (continued)
Setting Description