NETGEAR STM150EW-100NAS Router User Manual


 
Virtual Private Networking Using IPSec, PPTP, or L2TP Connections
276
ProSecure Unified Threat Management (UTM) Appliance
Use the NETGEAR VPN Client Wizard to Create a Secure Connection
The VPN client lets you set up the VPN connection manually (see Manually Create a Secure
Connection Using the NETGEAR VPN Client on page 280) or with the integrated
Configuration Wizard, which is the easier and preferred method. The Configuration Wizard
configures the default settings and provides basic interoperability so that the VPN client can
easily communicate with the UTM (or third-party VPN devices). The Configuration Wizard
does not let you enter the local and remote IDs, so you need to enter this information
manually.
Note: Perform these tasks from a computer that has the NETGEAR
ProSafe VPN Client installed.
To use the Configuration Wizard to set up a VPN connection between the VPN client
and the UTM:
1. Right-click the VPN client icon in your Windows system tray, and select Configuration
Panel. The Configuration Panel screen displays.
Figure 159.
2. From the main menu on the Configuration Panel screen, select Configuration > Wizard.
The Choice of the remote equipment wizard screen (screen 1 of 3) displays.