Filter
Top Products
Network and System Management
443
ProSecure Unified Threat Management (UTM) Appliance
To configure the SNMPv3 settings:
1. Select Administration > SNMP. The SNMP screen displays (see Figure 261 on
page 441).
2. In the SNMPv3 Settings section of the screen, click the Add table button to configure a new
SNMPv3 user profile. The Add/Edit User pop-up screen displays:
Figure 262.
3. Enter the settings as explained in the following table:
Table 109. SNMPv3 settings
Setting Description
SNMPv3 Settings
User Name The SNMPv3 user name. There is no default name.
Security Level The level of security that indicates whether authentication and encryption are enabled:
• NoAuth, NoPrivate. Both authentication and encryption are disabled.
• Auth, NoPrivate. Authentication is enabled but encryption is disabled.
• Auth, Private. Both authentication and encryption are enabled.