Filter
Top Products
Firewall Protection
162
ProSecure Unified Threat Management (UTM) Appliance
Figure 86.
2. In the ALG section, select the Enable SIP ALG check box.
3. In the ALG section, click Apply to save your settings.
4. In the VPN scan section, select the Enable VPN scan check box.
5. In the VPN scan section, click Apply to save your settings.
Create Services, QoS Profiles, Bandwidth Profiles, and
Traffic Meter Profiles
• Add Customized Services
• Create Service Groups
• Create IP Groups
• Create Quality of Service Profiles
• Create Bandwidth Profiles
• Create Traffic Meter Profiles
When you create inbound and outbound firewall rules, you use firewall objects such as
services, service groups, IP groups (LAN and WAN groups), QoS profiles, bandwidth profiles,
traffic meter profiles, and schedules to narrow down the firewall rules:
• Services. A service narrows down the firewall rule to an application and a port number.
You can also narrow down the firewall rule to a group of services. For information about
adding services and service groups, see Add Customized Services on page 163 and
Create Service Groups on page 165.
• IP groups. An IP group is a LAN group or a WAN group to which you add individual IP
addresses. You can narrow down the firewall rule to such an IP group. For information
about creating IP groups, see Create IP Groups on page 167.