Filter
Top Products
Default Settings and Technical Specifications
668
ProSecure Unified Threat Management (UTM) Appliance
Firewall and network security
Inbound LAN WAN rules (communications coming in
from the Internet)
All traffic is blocked, except for traffic in
response to requests from the LAN.
Outbound LAN WAN rules (communications from the
LAN to the Internet)
All traffic is allowed.
Inbound and outbound DMZ WAN rules None
Inbound and outbound LAN DMZ rules None
Respond to ping on WAN (Internet) ports Disabled
Stealth mode Enabled
Block TCP flood Disabled
Block UDP flood Disabled
Respond to ping on LAN ports Disabled
VPN pass-through for IPSec in NAT mode Enabled
VPN pass-through for PPTP in NAT mode Enabled
VPN pass-through for L2TP in NAT mode Enabled
Multicast pass-through for IGMP Disabled
Session limits Disabled
TCP time-out 1200 seconds
UDP time-out 180 seconds
ICMP time-out 8 seconds
SIP ALG Disabled
VPN scanning Disabled
Source MAC filtering Disabled
IP/MAC bindings Disabled
Port triggering rules None
UPnP Disabled
QoS profiles None configured
Bandwidth profiles None configured
LAN traffic meter profiles None configured
IPS Disabled
Table 193. UTM default configuration settings (continued)
Feature Default behavior