Filter
Top Products
578
B
B. Wireless Network Module for the
UTM9S and UTM25S
This appendix describes how to configure the wireless features of the NMSWLSN wireless
network module that you can install in a UTM9S or UTM25S. This appendix includes the
following sections:
• Overview of the Wireless Network Module
• Configure the Basic Radio Settings
• Wireless Data Security Options
• Wireless Security Profiles
• Configure a Wireless Distribution System
• Configure Advanced Radio Settings
• Configure WMM QoS Priority Settings
• Test Basic Wireless Connectivity
• For More Information About Wireless Configurations
Before you set up the wireless features that are described in this appendix, connect the
UTM9S or UTM25S and get the Internet connection working. The UTM9S or UTM25S should
work with an Ethernet or DSL WAN connection, or with both. In planning your wireless
network, consider the level of security required.
Note: In previous releases for the UTM9S, this network module was referred to
as the UTM9SWLSN. The UTM9SWLSN is identical to the NMSWLSN.
WARNING:
If you are configuring the wireless settings from a wireless
computer and you change the wireless network module’s SSID,
channel, or wireless security settings, you will lose your wireless
connection when you click Apply. You then need to change the
wireless settings of your computer to match the wireless network
module’s new settings.