Filter
Top Products
Virtual Private Networking Using SSL Connections
363
ProSecure Unified Threat Management (UTM) Appliance
Configure Applications for Port Forwarding
Port forwarding provides access to specific defined network services. To define these
services, you need to specify the internal server addresses and port numbers for TCP
applications that are intercepted by the port-forwarding client on the user’s computer. This
client reroutes the traffic to the UTM.
Add Servers and Port Numbers
To configure port forwarding, you need to define the IP addresses of the internal servers and
the port number for TCP applications that are available to remote users.
To add a server and a port number:
1. Select VPN > SSL VPN > Port Forwarding. The Port Forwarding screen displays. (The
following figure shows an example.)
Figure 218.
2. In the Add New Application for Port Forwarding section of the screen, specify information in
the following fields:
• IP Address. The IP address of an internal server or host computer that a remote user
has access to.
• TCP Port. The TCP port number of the application that is accessed through the SSL
VPN tunnel. The following table lists some commonly used TCP applications and port
numbers.