NETGEAR STM150EW-100NAS Router User Manual


 
Manually Configure Internet and WAN Settings
76
ProSecure Unified Threat Management (UTM) Appliance
Figure 41.
6. If your connection is PPTP or PPPoE, your ISP requires an initial login. Enter the settings as
explained in the following table:
Table 14. PPTP and PPPoE settings
Setting Description
Austria (PPTP) If your ISP is Austria Telecom or any other ISP that uses PPTP for login, select this radio
button, and enter the following settings:
Account Name The account name is also known as the host name or system name.
Enter the account name for the PPTP connection (usually your email ID
assigned by your ISP). Some ISPs require you to enter your full email
address here.
Domain Name Your domain name or workgroup name assigned by your ISP, or your
ISP’s domain name. You can leave this field blank.
Idle Timeout Select the Keep Connected radio button to keep the connection always
on. To log out after the connection is idle for a period:
1. Select the Idle Timeout radio button.
2. In the time-out field, enter the number of minutes to wait before
disconnecting.
This is useful if your ISP charges you based on the period that you are
logged in.
My IP Address The IP address assigned by the ISP to make the connection with the
ISP server.
Server IP
Address
The IP address of the PPTP server.