NETGEAR STM150EW-100NAS Router User Manual


 
Wireless Network Module for the UTM9S and UTM25S
594
ProSecure Unified Threat Management (UTM) Appliance
Figure 343.
Note: The default wireless profile with profile name UTM9S or UTM25S is
referred to as virtual access point zero (VAP0). If you add more
wireless profiles, they are referred to as VAP1, VAP2, and VAP3.
3. In the MAC Filter Configuration section of the screen, enter a MAC address in the MAC
Address field.
4. Click Add to add the MAC address to the MAC Address table.
5. Repeat step 3 and step 4 for any other MAC addresses that you want to add to the MAC
Address table.
6. In the Access Control List Status section of the screen, from the ACL Policy Status
drop-down list, select if access control is enabled, and if so, how the MAC addresses in the
MAC Address table are treated:
Open. Access control is disabled. All MAC addresses, including the ones in the MAC
Address table, are allowed access.
Allow. Only the MAC addresses in the MAC Address table are allowed access. All
other MAC addresses are denied access.
Deny. The MAC addresses in the MAC Address table are denied access. All other
MAC addresses are allowed access.
7. Click Apply to save your settings.