xDSL Network Module for the UTM9S and UTM25S
559
ProSecure Unified Threat Management (UTM) Appliance
8. In the Domain Name Server (DNS) Servers section of the screen (see the following figure),
specify the DNS settings as explained in the following table.
Figure 328.
Table 143. Internet IP address settings
Setting Description
Get Dynamically
from ISP
If your ISP has not assigned you a static IP address, select the Get Dynamically from
ISP radio button. The ISP automatically assigns an IP address to the UTM9S or
UTM25S using DHCP network protocol.
Use Static IP
Address
If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Static IP Address radio button, and enter the following settings:
IP Address Static IP address assigned to you. This address identifies the
UTM9S or UTM25S to your ISP.
Subnet Mask The subnet mask is usually provided by your ISP.
Gateway IP Address The IP address of the ISP’s gateway is usually provided by
your ISP.
Use IP Over
ATM (IPOA)
If your ISP uses IP over ATM (IPoA), select the Use IP Over ATM (IPOA) radio button,
and enter the following settings:
IP Address The IP address assigned to you. This address identifies the
UTM9S or UTM25S to your ISP.
Subnet Mask The subnet mask is usually provided by your ISP.
Gateway IP Address The IP address of the ISP’s gateway is usually provided by
your ISP.