Filter
Top Products
2
ProSecure Unified Threat Management (UTM) Appliance
Support
Thank you for choosing NETGEAR.
After installing your device, locate the serial number on the label of your product and use it to register your product
at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the UTM’s Registration screen (see Register the UTM
with NETGEAR on page 65). You can also register your product through the NETGEAR website. For product
updates and web support, visit http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR.
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/general/contact/default.aspx.
NETGEAR recommends that you use only the official NETGEAR support resources.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. Other brand and product names are registered trademarks or trademarks of their respective
holders. © NETGEAR, Inc. All rights reserved.
ProSecure Product Updates
Product updates are available on the NETGEAR website at http://prosecure.netgear.com or
http://support.netgear.com.
ProSecure Forum
Visit http://prosecure.netgear.com/community/forum.php for information about the ProSecure forum and to
become part of the ProSecure community.
Revision History
Publication
Part Number
Version Publish Date Comments
202-10780-03 1.0 October 2012 • Added the UTM25S, which supports the same features as
the UTM9S.
• Stated support for the NETGEAR Network Management
System NMS200.
• Updated the figures and menu paths in Chapter 6, Content
Filtering and Optimizing Scans, because the Application
Security configuration menu of the web management
interface was revised and several minor features were
added.
• Added Configure HTTPS Smart Block.
•Revised Use a Simple Network Management Protocol
Manager because new SNMP features, including support
for SNMPv3, were added.
•Revised Chapter 11, Monitor System Access and
Performance because several minor features were added.
• Updated Appendix B, Wireless Network Module for the
UTM9S and UTM25S, because the wireless network
module now supports four wireless security profiles and
the Wireless Settings configuration menu of the web
management interface was revised.