NETGEAR STM150EW-100NAS Router User Manual


 
666
H
H. Default Settings and Technical Specifications
This appendix provides the default settings and the physical and technical specifications of the
UTM in the following sections:
Default Settings
Physical and Technical Specifications
Default Settings
You can use the Factory Defaults reset button on the rear panel to reset all settings to their
factory defaults. This is called a hard reset (for more information, see Revert to Factory
Default Settings on page 447):
To perform a hard reset, press and hold the Factory Defaults reset button for
approximately 8 seconds (until the Test LED blinks rapidly). The UTM returns to the
factory configuration settings that are shown in the following table.
Pressing the Factory Defaults reset button for a shorter period simply causes the UTM to
reboot.
The following table shows the default configuration settings for the UTM:
Table 193. UTM default configuration settings
Feature Default behavior
Login settings
User login URL https://192.168.1.1
Administrator user name (case-sensitive) admin
Administrator login password (case-sensitive) password
Guest user name (case-sensitive) guest
Guest login password (case-sensitive) password