Filter
Top Products
Monitor System Access and Performance
496
ProSecure Unified Threat Management (UTM) Appliance
Firmware Version (UTM9S
and UTM25S only)
The firmware on the xDSL network module.
WAN State The WAN state can be either UP or DOWN, depending on whether the port is
connected to the Internet and whether the port is enabled. For information about
connecting WAN ports, see Chapter 3, Manually Configure Internet and WAN
Settings.
NAT The NAT state can be either Enabled or Disabled, depending on whether NAT is
enabled (see Configure Network Address Translation (All Models) on page 81) or
classical routing is enabled (see Configure Classical Routing (All Models) on
page 82).
Connection Type The connection type can be Static IP, DHCP, PPPoE, or PPTP, depending on
whether the WAN address is obtained dynamically through a DHCP server or
assigned statically by you. For information about connection types, see Manually
Configure the Internet Connection on page 75.
Connection State The connection state can be either Connected or Not Connected, depending on
whether the WAN port is physically connected to a modem or router. For
information about connecting a WAN port, see the ProSecure Unified Threat
Management UTM Installation Guide
.
WAN Connection Type The detected type of Internet connection that is used on this port. The WAN
connection type can be DSL, ADSL, CableModem, T1, or T3.
Upload Connection Speed For the WAN port, this field displays the
maximum upload speed that you have
configured on the Advanced Options screen.
By default, the speed is 1,000,000 Kbps.
For the xDSL and USB ports, this field
displays the detected upload speed.
For information about configuring
the upload and download speeds for
WAN interfaces, see Set the UTM’s
MAC Address and Configure
Advanced WAN Options on
page 94.
Download Connection
Speed
For the WAN port, this field displays the
maximum download speed that you have
configured on the Advanced Options screen.
By default, the speed is 1,000,000 Kbps.
For the xDSL and USB ports, this field
displays the detected download speed.
IP Address The IP address of the WAN port.
These settings are either obtained
dynamically from your ISP or
specified by you on the WAN ISP
Settings screen for this port (see
Manually Configure the Internet
Connection on page 75).
Subnet Mask The subnet mask of the WAN port.
Gateway The IP address of the gateway.
Primary DNS Server The IP address of the primary DNS server.
Secondary DNS Server The IP address of the secondary DNS
server.
Table 127. Detailed Status screen fields (continued)
Item Description