NETGEAR STM150EW-100NAS Router User Manual


 
Use the Setup Wizard to Provision the UTM in Your Network
50
ProSecure Unified Threat Management (UTM) Appliance
Enable DHCP Server
(continued)
Primary DNS
Server
This setting is optional. If an IP address is specified, the UTM
provides this address as the primary DNS server IP address. If no
address is specified, the UTM provides its own LAN IP address as
the primary DNS server IP address.
Secondary DNS
Server
This setting is optional. If an IP address is specified, the UTM
provides this address as the secondary DNS server IP address.
WINS Server This setting is optional. Enter a WINS server IP address to specify
the Windows NetBIOS server, if one is present in your network.
Lease Time Enter a lease time. This specifies the duration for which IP addresses
are leased to clients.
DHCP Relay Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for a
DHCP server somewhere else on your network. Enter the following setting:
Relay Gateway The IP address of the DHCP server for which the UTM serves as a
relay.
Enable LDAP
information
Select the Enable LDAP information check box to enable the DHCP server to provide
Lightweight Directory Access Protocol (LDAP) server information. Enter the following
settings.
Note: The LDAP settings that you specify as part of the VLAN profile are used only for
SSL VPN and UTM authentication, but not for web and email security.
LDAP Server The IP address or name of the LDAP server.
Search Base The search objects that specify the location in the directory tree from
which the LDAP search begins. You can specify multiple search
objects, separated by commas. The search objects include:
CN (for common name)
OU (for organizational unit)
O (for organization)
C (for country)
DC (for domain)
For example, to search the Netgear.net domain for all last names of
Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
Port The port number for the LDAP server. The default setting is 0 (zero).
DNS Proxy
Enable DNS Proxy This setting is optional. Select the Enable DNS Proxy radio button to enable the UTM
to provide a LAN IP address for DNS address name resolution. This radio button is
selected by default.
Note: When the DNS Proxy option is disabled, all DHCP clients receive the DNS IP
addresses of the ISP but without the DNS proxy IP address.
Table 4. Setup Wizard Step 1: LAN Settings screen settings (continued)
Setting Description