Filter
Top Products
Other Packaging
If it is necessary to use packaging materials other than the type used in original factory
packaging, the following general instructions should be followed.
1. Separate the two instrument sections and wrap each in heavy paper or plastic.
2. Place the instrument sections in separate containers with 8 to 10 cm (3 to 4 inches) of
shock-absorbing material around all sides to provide firm cushioning and prevent movement
inside the container. Protect front panels with cardboard. Double-wall corrugated cartons
of 125 kg (275 lb) bursting strength are sufficient for shipping containers.
3. Seal each container securely and, if shipping to a Hewlett-Packard office or service center,
attach a tag to each container indicating the type of service required, return address, model
number and full serial number. For your convenience, a supply of tags is included at the
end of this section.
4. Mark each container FRAGILE to assure careful handling.
General Information 7