Filter
Top Products
7 - 24
7 AUXILIARY AND APPLIED FUNCTIONS
[Cautions]
(1) Home position return and continuously start of home position return are also
possible in the proximity dog ON in the count type 2.
When the home position return and continuously start of home position return are
executed in the proximity dog ON, the home position return is executed after return
the axis once to position of the proximity dog OFF.
(2) When the "travel value after proximity dog ON" is less than the deceleration
distance from "home position return speed" to "creep speed", a minor error "an
overrun occurred because the setting travel value is less than the deceleration
distance at the proximity dog signal input during home position return of count
type" (error code: 209) will occur and deceleration stop is made.
(3) Command position is the home position.
(4) If in-position signal (M2402+20n) does not turn ON, home position return is not
ended.