Filter
Top Products
E6581301
J-6
10
No. Option name Function, purpose.
(7)
LED Remote Keypad
option
(with parameter copy
function)
Extention operation panel unit with parameter copy function. Includes LED display,
RUN/STOP key, UP/DOWN key, MODE key, ENT key, EASY key, and COPY MODE key.
(When using this unit, set as follows: H (common serial transmission waiting time) =
(default setting). Use communication cable No. 10 to connect to the inverter.
Panel type: RKP002Z
Cable type: CAB0011 (1m), CAB0013 (3m), CAB0015 (5m)
(8)
LCD Remote Keypad
option
This LCD operation panel unit can be installed to the inverter unit. Includes LCD display,
RUN key, STOP/RESET key, job dial, ESC key, FWD/REV key and F1 to F4 key.
Special cable is needed to connect the inverter and LCD panel.
Panel type: RKP004Z
LCD cable type: CAB0071 (1m), CAB0073 (3m), CAB0075 (5m) , CAB00710 (10m)
(9)
USB communication
converter unit
(for communication with
multiple inverters)
More than one inverter can be controlled with a personal computer and so on if this unit is
used for connection between inverters and personal computer.
• Computer link: Since this unit makes it possible to connect inverters with higher-class
computer, FA computer, etc., a data communication network can be
constructed among multiple inverters.
Unit type: USB001Z
(10)
Communication cable
For RS485/USB communication (between inverter and RS485/USB communication
conversion unit)
Cable type: CAB0011 (1m), CAB0013 (3m), CAB0015 (5m)
(11)
Operation panel A frequency meter, frequency setup device, RUN/STOP (forward, reverse) switch are built in
this operation panel. (Model: CBVR-7B1)
(12)
heat sink outside
protrusion option
This allows is heat generated inside panels to be reduced