Filter
Top Products
Contents
x
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Setting Up and Configuring Ethernet OAM 10-35
Default Ethernet OAM Configuration 10-36
Restrictions and Guidelines 10-36
Enabling Ethernet OAM on an Interface 10-36
Enabling Ethernet OAM Remote Loopback 10-38
Configuring Ethernet OAM Link Monitoring 10-38
Configuring Ethernet OAM Remote Failure Indications 10-41
Configuring Ethernet OAM Templates 10-42
Displaying Ethernet OAM Protocol Information 10-45
Verifying Ethernet OAM Configuration 10-46
Understanding E-LMI 10-48
Restrictions 10-49
Configuring E-LMI 10-49
Default E-LMI Configuration 10-49
Enabling E-LMI 10-50
Displaying E-LMI Information 10-51
Understanding Ethernet Loopback 10-51
Configuring Ethernet Loopback 10-51
Restrictions 10-52
Enabling Ethernet Loopback 10-52
Configuration Example 10-54
Configuring Y.1564 to Generate Ethernet Traffic 10-56
Configuring IP SLA for Traffic Generation 10-58
Configuration Examples 10-60
CHAPTER
11 ITU-T Y.1731 Performance Monitoring 11-1
Finding Feature Information 11-1
Contents 11-1
Prerequisites for ITU-T Y.1731 Performance Monitoring 11-1
Restrictions for ITU-T Y.1731 Performance Monitoring 11-2
Information About ITU-T Y.1731 Performance Monitoring 11-2
Frame Delay and Frame-Delay Variation 11-3
Frame Loss Ratio 11-4
On-Demand and Concurrent Operations 11-4
Supported interfaces 11-5
Benefits of ITU-T Y.1731 Performance Monitoring 11-5
How to Configure ITU-T Y.1731 Performance Monitoring 11-5
Configuring Two-Way Delay Measurement 11-6
Configuring Single-Ended Synthetic Loss Measurement 11-9