Filter
Top Products
Contents
xxix
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Configuring an N-to-1 vPC Cell Mode 36-8
ATM AAL5 SDU VCC Transport 36-9
Verifying IMA Configurations 36-10
How to Configure ATM Class of Service 36-11
Configuring Constant Bit Rate 36-11
Configuring Unspecified Bit Rate 36-12
Configuring Unspecified Bit Rate Plus 36-13
Configuring Variable Bit Rate for Real/Non-Real Time Traffic 36-14
Configuration Examples 36-15
Example: Creating an IMA Interface 36-15
Example: Configuring a Port Mode Pseudowire 36-15
Example: Configuring an N-to-1 VCC Cell Mode 36-16
Example: Configuring an N-to-1 VPC Cell Mode 36-16
Example: Configuring CBR 36-16
Example: Configuring UBR 36-16
Example: Configuring UBR Plus 36-17
Example: Configuring VBR for Real Time Traffic 36-17
Example: Configuring VBR for Non-Real Time Traffic 36-17
Configuring Marking MPLS Experimental Bits 36-17
Creating a Policy-map for PVP/PVC/ATM IMA Interface 36-17
Applying the Policy-map 36-18
Applying a Policy map on PVC and PVP 36-18
Applying a Policy map on ATM IMA Interface 36-20
Creating a Table-map 36-21
Creating a Policy-map for SVI Interface 36-22
Applying a Service Policy on SVI Interface 36-23
Additional References 36-25
Related Documents 36-25
Standards 36-25
MIBs 36-25
RFCs 36-25
Technical Assistance 36-25
Feature Information for Inverse Multiplexing over ATM 36-26
CHAPTER
37 IPv6 over MPLS: 6PE and 6VPE 37-1
Finding Feature Information 37-1
Contents 37-1
Prerequisites 37-2
Restrictions 37-2