Filter
Top Products
CHAPTER
4-1
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
4
Managing and Monitoring Network
Management Features
This feature module describes how to monitor, manage and deploy a variety of network management
features, including Cisco Active Network Abstraction (ANA), Simple Network Management Protocol
(SNMP) and Cisco Networking Services (CNS). The CNS software agent on the ASR 901 can
communicate with a Cisco Configuration Engine to allow the ASR 901 to be deployed in the field
without having to pre-stage it for configuration or image upgrade. The Zero-touch deployment capability
enables the ASR 901 router to auto configure itself, download an updated image, connect to the network,
and start the operation as soon as it is cabled and powered up.
For more information about the Cisco Configuration Engine, see
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps4617/qa_c67_598467.html
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the “Feature Information for Monitoring and Managing the ASR 901 Router” section on
page 4-18.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Network Management Features for the ASR 901, page 4-2
• How to Configure Network Management Features on ASR 901, page 4-2
• Where to Go Next, page 4-16
• Additional References, page 4-16
• Feature Information for Monitoring and Managing the ASR 901 Router, page 4-18