Filter
Top Products
11-20
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 11 ITU-T Y.1731 Performance Monitoring
How to Configure IP SLAs Y.1731 On-Demand and Concurrent Operations
DETAILED STEPS
Configuring Referenced On-Demand Operation on a Sender MEP
Prerequisites
Single-ended and concurrent Ethernet delay, or delay variation, and frame loss operations to be
referenced must be configured.
SUMMARY STEPS
1. enable
2. ip sla on-demand ethernet slm operation number {duration seconds | max number-of-packets}
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
ip sla on-demand ethernet slm domain
domain-name
{evc
evc-id
| vlan
vlan-id
} {mpid
target-mp-id
|
mac-address
target-address
} cos
cos
{source {mpid
source-mp-id
| mac-address
source-address
}}
{continuous [interval
milliseconds
] | burst [interval
milliseconds
] [number
number-of-frames
] [frequency
seconds
]} [size
bytes
] aggregation
seconds
{duration
seconds
| max
number-of-packets
}
Example:
Router# ip sla on-demand ethernet SLM domain xxx
vlan 12 mpid 34 cos 4 source mpid 23 continuous
aggregation 10 duration 60
Creates and runs an on-demand operation in direct
mode.
Repeat this step for each on-demand operation to be
run.
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
ip sla on-demand ethernet slm
operation number
{
duration
seconds
| max
number-of-packets
}
Example:
Router# ip sla on-demand ethernet slm 11
Creates and runs a pseudo operation of the operation
being referenced, in the background.
Repeat this step for each on-demand operation to be
run.