11-12
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 11 ITU-T Y.1731 Performance Monitoring
How to Configure ITU-T Y.1731 Performance Monitoring
Step 9
frame interval
milliseconds
Example:
Router(config-sla-y1731-loss)# frame interval 100
(Optional) Sets the gap between successive frames.
• milliseconds—Specifies the length of time in
milliseconds (ms) between successive synthetic
frames. The range is from 100 to 10000. The
default is 1000.
Step 10
frame size
bytes
Example:
Router(config-sla-y1731-loss)# frame size 32
(Optional) Configures padding size for frames.
• bytes—Specifies the padding size, in four-octet
increments, for the synthetic frames. The range is
from 64 to 384. The default is 64.
Step 11
history interval
intervals-stored
Example:
Router(config-sla-y1731-loss)# history interval 2
(Optional) Sets the number of statistics distributions
kept during the lifetime of an IP SLAs Ethernet
operation.
• intervals-stored—Specifies the number of
statistics distributions. The range is from 1 to 10.
The default is 2.
Step 12
owner
owner-id
Example:
Router(config-sla-y1731-loss)# owner admin
(Optional) Configures the owner of an IP SLAs
operation.
• owner-id—Specified the name of the SNMP
owner. The value is from 0 to 255 ASCII
characters.
Step 13
exit
Example:
Router(config-sla-y1731-loss)# exit
Exits IP SLA Y.1731 loss configuration mode and
enters IP SLA configuration mode.
Step 14
exit
Example:
Router(config-ip-sla)# exit
Exits IP SLA configuration mode and enters global
configuration mode.
Command Purpose
