4-7
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 4 Managing and Monitoring Network Management Features
How to Configure Network Management Features on ASR 901
• notification-type—(Optional) Type of notification to be sent to the
host. If no type is specified, all notifications are sent. The notification
type can be one or more of the following keywords:
–
aaa_server—Enables SNMP AAA Server traps.
–
atm—Enables SNMP ATM Server traps.
–
ccme—Enables SNMP CCME traps.
–
cnpd—Enables NBAR Protocol Discovery traps.
–
config—Enables SNMP config traps.
–
config-copy—Enables SNMP config-copy traps.
–
cpu—Allow cpu related traps.
–
dial—Enables SNMP dial control traps.
–
dnis—Enables SNMP DNIS traps.
–
ds0-busyout—Enables ds0-busyout traps.
–
ds1—Enables SNMP DS1 traps.
–
ds1-loopback—Enables ds1-loopback traps.
–
ds3—Enables SNMP DS3 traps.
–
dsp—Enables SNMP dsp traps.
–
eigrp—Enables SNMP EIGRP traps.
–
entity—Enables SNMP entity traps.
–
envmon—Enables SNMP environmental monitor traps.
–
flash—Enables SNMP FLASH notifications.
–
frame-relay—Enables SNMP frame-relay traps.
–
hsrp—Enables SNMP HSRP traps.
–
icsudsu—Enables SNMP ICSUDSU traps.
–
ipmulticast—Enables SNMP ipmulticast traps.
–
ipran—Enables IP-RAN Backhaul traps.
–
ipsla—Enables SNMP IP SLA traps.
–
isdn—Enables SNMP isdn traps.
–
12tun—Enables SNMP L2 tunnel protocol traps.
–
mpls—Enables SNMP MPLS traps.
–
msdp—Enables SNMP MSDP traps.
–
mvpn—Enables Multicast Virtual Private Networks traps.
–
ospf—Enables OSPF traps.
–
pim—Enables SNMP PIM traps.
Command Purpose