Filter
Top Products
32-49
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 32 IPv6 Support on the Cisco ASR 901 Router
Feature Information for IPv6 Support on the Cisco ASR 901 Router
Feature Information for IPv6 Support on the Cisco ASR 901
Router
Table 32-2 lists the release history for this feature.
Table 32-2 lists the features in this module and provides links to specific configuration information.
Use Cisco Feature Navigator to find information about platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software
release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
An account on Cisco.com is not required.
Note Table 32-2 lists only the software release that introduced support for a given feature in a given software
release train. Unless noted otherwise, subsequent releases of that software release train also support that
feature.
Table 32-2 Feature Information for IPv6 Support on the Cisco ASR 901 Router
Feature Name Releases Feature Information
IPv6 Support on the Cisco ASR 901 Router 15.2(2)SNG This feature is introduced on the Cisco ASR 901 routers.
The following sections provide information about this
feature:
• IPv6 Address Formats, page 32-3
• IPv6 Addressing and Discovery, page 32-4
• Routing Protocols, page 32-7
• Bidirectional Forwarding Detection for IPv6,
page 32-7
• How to Configure IPv6 Support on the Cisco ASR 901
Router, page 32-8
• Verifying the Configuration of IPv6 Support on the
Cisco ASR 901 Router, page 32-27
• Configuration Examples for IPv6 Support on the Cisco
ASR 901 Router, page 32-39
ICMPv6 15.2(2)SNG The ICMP is used to generate error messages.
Platform-Independent Cisco IOS Software Documentation
The following section of the “Implementing IPv6
Addressing and Basic Connectivity” chapter of the IPv6
Configuration Guide provide information about this
feature:
• ICMP for IPv6