38-3
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 38 Storm Control
Configuring Storm Control
SUMMARY STEPS
1. enable
2. configure terminal
3. interface type number
4. storm-control {action {shutdown | trap}| {broadcast | multicast | unicast} {level {level | bps
bps-level | pps pps-level}}
5. end
DETAILED STEPS
Command Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface
type number
Example:
Router(config)# interface
gigabitethernet 0/1
Specifies an interface type and number, and enters interface
configuration mode.