22-24
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 22 Configuring Clocking
Configuring PTP for the Cisco ASR 901 Router
Step 9
sync interval
interval
Example:
Router(config-ptp-port)# sync
interval -5
(Optional) Specifies the interval used to send PTP
synchronization messages. The intervals are set using log
base 2 values. The Cisco ASR 901 router supports the
following values:
• -5—1 packet every 1/32 seconds, or 32 packets per
second.
• -6—1 packet every 1/64 seconds, or 64 packets per
second.
The default is -6.
Step 10
end
Example:
Router(config-ptp-port)# end
Exits clock port configuration mode and enters privileged
EXEC mode.
Command Purpose