12-23
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 12 Configuring Resilient Ethernet Protocol
Configuring Resilient Ethernet Protocol (REP)
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
show interface [
interface-id
]
rep [detail]
Example:
Router# show interface gigabitethernet0/1 rep
detail
(Optional) Displays the REP configuration and status for
a specified interface.
• Enter the physical Layer 2 interface or port channel
(logical interface) and the optional detail keyword,
if desired.
Step 3
show rep topology [segment
segment-id
] [archive]
[detail]
Example:
Router# show rep topology
(Optional) Displays REP topology information for a
segment or for all segments, including the primary and
secondary edge ports in the segment.
• Enter the optional keywords and arguments, as
desired.