Filter
Top Products
CHAPTER
31-1
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
31
Microwave ACM Signaling and EEM Integration
This feature module describes the Microwave Adaptive Code Modulation (ACM) Signaling and
Embedded Event Manager (EEM) integration, which enables the microwave radio transceivers to report
link bandwidth information to an upstream Ethernet switch and take action on the signal degradation to
provide optimal bandwidth.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the “Feature Information for Microwave ACM Signaling and EEM Integration” section on
page 31-17.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites, page 31-2
• Feature Overview, page 31-2
• How to Configure Microwave ACM Signaling and EEM Integration, page 31-4
• Configuration Examples for Microwave ACM Signaling and EEM Integration, page 31-11
• Additional References, page 31-16
• Feature Information for Microwave ACM Signaling and EEM Integration, page 31-17