12-14
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 12 Configuring Resilient Ethernet Protocol
Configuring Resilient Ethernet Protocol (REP)
Step 12
end
Example:
Router(config-if)# end
Returns to privileged EXEC mode.
Step 13
show interface [
interface-id
]
rep
[detail]
Example:
Router# show interface gigabitethernet0/1
rep detail
Verifies the REP interface configuration.
• Enter the physical Layer 2 interface or port channel (logical
interface) and the optional detail keyword, if desired.
Step 14
show rep topology [segment
segment-id
]
[archive] [detail]
Example:
Router# show rep topology segment 1
Indicates which port in the segment is the primary edge port.
Step 15
copy running-config startup config
Example:
Router# copy running-config startup
config
(Optional) Saves your entries in the router startup configuration
file.
Command Purpose