Filter
Top Products
2-10
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 2 Licensing
Port or Interface Behavior
Installing licenses from "flash:CAT1632U029_20121005013805577.lic"
Installing…Feature:1588BC…Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
Following is a sample output from the show license command:
Note When the 1588BC license is installed and PTP boundary clock is not configured, the license state is
displayed as
Active, Not in Use. When the 1588BC license is installed and PTP boundary clock is
configured, the license state is displayed as Active, In Use.
Router# show license
Index 1 Feature: AdvancedMetroIPAccess
Index 2 Feature: IPBase
Index 3 Feature: Gige4portflexi
Index 4 Feature: 10gigUpgrade
Index 5 Feature: 1588BC
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Removing the 1588BC License
If PTP boundary clock is configured, then the following error message appears when removing the
1588BC license:
Router# license clear 1588BC
Feature: 1588BC
License Type: Permanent
License State: Active, In Use
License Addition: Exclusive
License Count: Non-Counted
Comment:
Store Index: 2
Store Name: Primary License Storage
Are you sure you want to clear? (yes/[no]): yes
Handling Event, Unknown event type: 3
% Error: Could not delete in-use license
Complete the following steps to remove the 1588BC license.
Step 1 Use the no ptp clock command to remove the PTP boundary clock configuration.
Router(config-ptp-clk)# no ptp clock boundary domain 0
Step 2 Use the license clear command to remove the 1588BC license.
Router# license clear 1588BC
Feature: 1588BC
License Type: Permanent
License State: Active, Not in Use
License Addition: Exclusive