32-10
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter32 IPv6 Support on the Cisco ASR 901 Router
How to Configure IPv6 Support on the Cisco ASR 901 Router
Configuring a Static IPv6 Route
SUMMARY STEPS
1. enable
2. configure terminal
3. ipv6 route {ipv6-prefix / prefix-length ipv6-address | interface-type interface-number
[ipv6-address]} [administrative-distance] [administrative-multicast-distance | unicast | multicast]
[tag tag]
DETAILED STEPS
Step 6
exit
Example:
Router(config-if)# exit
Exits interface configuration mode, and returns the router to
global configuration mode.
Step 7
ipv6 unicast-routing
Example:
Router(config)# ipv6 unicast-routing
Enables the forwarding of IPv6 unicast datagrams.
Step 8
ipv6 cef
Example:
Router(config)# ipv6 cef
Enables Cisco Express Forwarding (CEF) globally on the
router.
Command or Action Purpose
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.