Filter
Top Products
CHAPTER
33-1
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
33
Labeled BGP Support
This feature module describes how to add label mapping information to the Border Gateway Protocol
(BGP) message that is used to distribute the route on the Cisco ASR 901 Series Aggregation Services
Routers.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the “Feature Information for Labeled BGP Support” section on page 33-8.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites, page 33-2
• Restrictions, page 33-2
• Overview of Labeled BGP Support, page 33-2
• How to Configure Labeled BGP Support, page 33-2
• Configuration Example for Labeled Support, page 33-3
• Additional References, page 33-7
• Feature Information for Labeled BGP Support, page 33-8