-xxxix
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter
• CFM over EFP Interface with cross connect— This feature
allows you to:
–
Forward continuity check messages (CCM) towards the
core over cross connect pseudowires.
–
Receive CFM messages from the core.
–
Forward CFM messages to the access side (after
Continuity Check Database [CCDB] based on
maintenance point [MP] filtering rules).
• IPSLA Path Discovery—The LSP path discovery (LPD)
feature allows the IP SLA MPLS LSP to automatically
discover all the active paths to the forwarding equivalence
class (FEC), and configure LSP ping and traceroute
operations across various paths between the provide edge
(PE) devices.
• Routed QinQ—Pop 2 configuration is supported.
• Port Based EoMPLS—Port mode allows a frame coming
into an interface to be packed into an MPLS packet and
transported over the MPLS backbone to an egress interface.
The entire ethernet frame without the preamble or FCS is
transported as a single packet.
• Rommon and MCU upgrade—Upgradable MCU and
ROMMON is bundled with the IOS image. Once the IOS
image is upgraded, both the MCU and the ROMMON images
also get upgraded.
• T1.403 remote loopback—Cisco ASR 901 accepts the
remote loopback (line and payload) initiated at the far end.
• Layer3 VPN over REP/MST is supported.
Document
Number Date Change Summary