Filter
Top Products
11-15
Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09
Chapter 11 ITU-T Y.1731 Performance Monitoring
Verifying the Frame Delay and Synthetic Loss Measurement Configurations
DETAILED STEPS
Verifying the Frame Delay and Synthetic Loss Measurement
Configurations
• Example: Verifying Sender MEP for a Two-Way Delay Measurement Operation, page 11-16
• Example: Verifying Receiver MEP for a Two-Way Delay Measurement Operation, page 11-16
• Example: Verifying Sender MEP for a Synthetic Loss Measurement Operation, page 11-17
• Example: Verifying Ethernet CFM Performance Monitoring, page 11-17
• Example: Verifying History for IP SLAs Operations, page 11-18
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
Do one of the following:
• ip sla schedule
operation-number
[life {forever
|
seconds
}] [start-time {
hh : mm
[
: ss
] [
month day
|
day month
] | pending | now | after
hh : mm :
ss
}] [ageout
seconds
] [recurring]
• ip sla group schedule
group-operation-number
operation-id-numbers
schedule-period
schedule-period-range
[ageout
seconds
]
[frequency
group-operation-frequency
]
[life{forever |
seconds
}] [start-time{
hh:mm
[
:ss
]
[
month day
|
day month
] | pending | now | after
hh:mm:ss
}]
Example:
Router(config)# ip sla schedule 10 start-time now
life forever
Example:
Router(config)# ip sla group schedule 1 3,4,6-9
Configures the scheduling parameters for an
individual IP SLAs operation.
Specifies an IP SLAs operation group number and the
range of operation numbers to be scheduled for a
multi-operation scheduler.
Step 4
exit
Example:
Router(config)# exit
Exits global configuration mode and enters privileged
EXEC mode.